Join free

Plan & budget · Guides

Laminate vs acrylic vs PU for kitchen shutters (2026)

Design IRL Editorial · Figures checked 11 November 2026 · For owners choosing a shutter finish for a modular kitchen, and weighing looks against daily upkeep · How we make our guides

For kitchen shutters in India, laminate is the best value and the easiest to live with. Acrylic gives a high gloss for about 30% more but shows fingerprints, and PU gives a painted finish in a wide colour range for about 55% more. On HDHMR boxes that is about ₹8,000–15,000, ₹10,400–19,500 and ₹12,400–23,250 per running ft.

The short answer

Verdict

Laminate: best for a hard-working kitchen on a budget, and for insides and tall units in any kitchen. Acrylic: best for a glossy look if you are happy to wipe it often. PU: best for a painted, high-end finish in matte or gloss that takes heat and steam well.

How they compare

LaminateAcrylicPUMembraneLacquered glass
Kitchen cost, per running ft₹8,000–15,000₹10,400–19,500₹12,400–23,250₹8,800–16,500₹11,200–21,000 (glass or aluminium profile)
Finish cost, per sq ft₹400–900₹700–1,400 (Design Cafe: ₹800–1,600)₹1,200–2,500₹350–800₹1,500–3,000+
MoistureGood; edges can lift if water gets inGoodExcellentModerateExcellent if sealed and framed
HeatGoodGoodGoodPoorExcellent
ScratchesGood, especially matteModerate; fine scratches over timeGood, but hard to repair at homeModerateExcellent; can chip on hard knocks
DurabilityGoodGoodExcellentModerateExcellent (toughened)
LifespanNo year figures published for any finishHolds colour and gloss a long timeAsian Paints: can look new for a decadePeels with heatFades and peels less than acrylic
LookHuge range: woodgrains, solids, matte, glossHigh gloss; wide coloursMatte or gloss; wide coloursTextures, woodgrains, profiled shuttersDeep colours, glossy
MaintenanceDamp clothShows fingerprints; wipe every other dayEasy; doesn't trap greaseEasyEasy, but shows fingerprints
RepairRepainting rarely looks as good as factoryNew panel may not match the old shadeNeeds a professionalOften a whole new shutterA chipped panel is replaced
Best forBudget, heavy useA glossy lookA premium painted lookProfiled, traditional shuttersA feature cabinet
Kitchen rates installed on HDHMR boxes with granite and mid-range hardware, metro, before GST (Design IRL rate table, checked against Comaron and Design Cafe). Finish cost and ratings from Asian Paints Beautiful Homes; acrylic notes from Design Cafe. These are vendors' assessments, not lab tests.

Which to use where

Part of the kitchenUseWhy
Base cabinet shuttersMatte laminate or PUHands and knees touch them; matte hides marks
Wall cabinet shuttersAcrylic, PU or laminateTouched less, so gloss stays clean
Shutters next to the hobLaminate, PU or acrylic, not membraneMembrane handles heat poorly
Tall units and cabinet insidesLaminateRarely seen; costs least
Display or crockery cabinetLacquered glass or glass in a profileA feature, used gently
Rented flat or a busy family kitchenLaminateTakes knocks; easy to clean

When laminate is the right choice

For most kitchens. It is the base price, comes in more designs than anything else and cleans with a damp cloth. Matte laminate takes scratches well. The weak point is the edge: if water gets behind the banding, it lifts, so make sure every edge is sealed.

When acrylic is the right choice

When you want that mirror gloss and don't mind looking after it. Asian Paints is blunt: you will be wiping it every other day. Design Cafe says dark shades show stains and scratches most, and that a replacement panel years later may not match the old shade.

A good compromise is gloss acrylic on the wall cabinets and matte on the base, which Design Cafe suggests to cut down fingerprints.

When PU is the right choice

For a painted kitchen in a colour you choose, matte or gloss. PU takes steam and heat well and doesn't trap grease. It costs the most of the three, and a deep scratch is a job for the finisher, not a touch-up at home.

Cost for a typical 10×10 ft L-shaped kitchen

Two 10 ft walls give 18 running ft. At the typical rate of ₹11,000 per running ft on HDHMR boxes with granite:

ShuttersWorkingTypical ₹Range
Laminate18 × ₹11,000₹1,98,000₹1,44,000–2,70,000
Membrane18 × ₹11,000 × 1.1₹2,17,800₹1,58,400–2,97,000
Acrylic18 × ₹11,000 × 1.3₹2,57,400₹1,87,200–3,51,000
Glass or aluminium profile18 × ₹11,000 × 1.4₹2,77,200₹2,01,600–3,78,000
PU18 × ₹11,000 × 1.55₹3,06,900₹2,23,200–4,18,500
Cabinets only, metro, before GST, accessories and appliances. Comaron lists this size at ₹1,85,000–2,60,000 in laminate and ₹2,95,000–4,40,000 in PU.

Going from laminate to PU adds about ₹1.1 lakh on this kitchen. Acrylic sits in between at about ₹59,400 more.

Mistakes to avoid

  • Comparing a per sq ft finish price with a per running ft kitchen rate. The first is the shutter finish alone; the second is the whole cabinet.
  • Membrane shutters beside the hob. Asian Paints rates its heat resistance as poor, and once it peels the shutter usually has to be replaced.
  • High-gloss dark acrylic on base cabinets, if nobody will wipe them often.
  • Cleaning acrylic with scourers, dry brushes or paper towels, or hanging wet towels on it. Design Cafe advises a mild cleaner and a soft cloth.
  • Leaving laminate edges unbanded near the sink, where water gets under them.
  • Not writing the finish brand and shade into the quote. You will need it if a shutter is replaced later.

Common questions

Which is better for kitchen shutters, laminate, acrylic or PU?

For kitchen shutters, laminate is the best value and easiest to live with, acrylic gives high gloss but shows fingerprints, and PU gives a premium painted finish. On HDHMR boxes, kitchens cost about ₹8,000–15,000 per running ft in laminate, ₹10,400–19,500 in acrylic and ₹12,400–23,250 in PU.

Is acrylic better than laminate for a kitchen?

Acrylic looks glossier, but laminate is easier to live with. Acrylic costs about 30% more, shows fingerprints so it needs wiping every other day, and gets fine scratches over time. Matte laminate takes scratches well and cleans with a damp cloth.

Is PU finish worth it for a kitchen?

PU is worth it if you want a painted finish in matte or gloss and can spend about 55% more than laminate. Asian Paints rates its moisture resistance as excellent and says it doesn't trap grease, but scratches need a professional to repair.

Does acrylic scratch easily?

Acrylic kitchen shutters get fine scratches over time, and Design Cafe says marks show most on dark shades. Clean acrylic with a mild cleaner and a soft cloth, not scourers, dry brushes or paper towels.

Can membrane shutters be used near the hob?

Membrane shutters are best kept away from the hob. Asian Paints rates their heat resistance as poor, and once membrane peels the shutter usually has to be replaced rather than spot-repaired.

How much does a 10×10 kitchen cost in laminate, acrylic or PU?

A 10×10 ft L-shaped kitchen of 18 running ft on HDHMR boxes costs about ₹1,98,000 in laminate, ₹2,57,400 in acrylic and ₹3,06,900 in PU, for cabinets with granite in a metro city, before GST, accessories and appliances.

Find the people

Related guides

Sources

Most published cost figures come from firms that sell the work. We give ranges and you should get 2–3 quotes.

  1. Asian Paints Beautiful Homes: kitchen shutter finishes compared
  2. Design Cafe: acrylic kitchen cabinets
  3. Design Cafe: HDHMR sheets guide
  4. Comaron: modular kitchen prices by layout, 2026
  5. Design Cafe: modular kitchen cost in Ahmedabad

Your cart

Pick for your space

We’ll fit Room of the day, your cart’s alternatives and your budget to it.

Project type

Location

When are you starting?
What help do you need?Pick any

Saved in this browser. Join free to keep it on every device.

Laminate vs acrylic vs PU for kitchen shutters (2026)