Join free

Plan & budget · Guides

BWR vs BWP plywood for kitchen, bathroom and wardrobe (2026)

Design IRL Editorial · Figures checked 11 November 2026 · For owners and site supervisors deciding which plywood grade to specify, and checking the stamp when the sheets arrive · How we make our guides

For kitchens and bathrooms in India, BWP plywood is the safer choice under sinks and in vanities, because it is made to take continuous water; BWR is enough for other kitchen cabinets and wardrobes. With laminate shutters, BWR kitchen boxes cost about ₹8,400–15,750 per running ft and BWP about ₹9,600–18,000.

The short answer

Verdict

BWP (boiling water proof, including IS 710 marine): best for the sink base, bathroom vanities, utility areas and wardrobes on a damp wall. BWR (boiling water resistant): best for other kitchen base and wall cabinets, wardrobes on dry walls and living-room units.

How they compare

BWR plywoodBWP plywood
StandardIS 303IS 303 (BWP grade, added for interior use) or IS 710 (marine)
GlueSources differ: Greenply says urea-formaldehyde, CenturyPly says phenolicPhenol-formaldehyde
Water testIS 303: three cycles of 8 h in boiling water and 16 h drying at 65°CMade for prolonged submersion in boiling water without delamination
Kitchen cost, per running ft₹8,400–15,750₹9,600–18,000
Board price, 18 mm sheet₹2,200–3,600₹2,800–6,000
Board price, per sq ft₹55–85₹80–130 (another Greenply page: ₹115–180)
Water and moistureFine with splashes; degrades with sustained waterTakes continuous water exposure
StrengthStronger than MR gradeThe strongest grade
Lifespan in wet areas3–5 years10–15+ years
Warranty (examples)No figure in our sourcesCenturyPly 8 years to lifetime (termite); Greenply 710 lifetime
Finish optionsLaminate or veneerLaminate or veneer
Best forDry and semi-dry cabinetsSink base, vanity, utility, damp walls
Kitchen rates installed with laminate shutters and granite, metro, before GST (Design IRL rate table). Sheet prices from CenturyPly; per sq ft prices, lifespans and glue from Greenply; test from IS 303:1989 (Amendment 4). Brands' figures are their own claims and vary by thickness and city.

IS 303 used to cover only MR and BWR. In 2024 Ply Reporter reported that BIS had added a BWP grade for interior plywood, so a BWP sheet can now carry either IS 303 or IS 710. IS 710 is the marine standard, written for boat-building. Ply Reporter quotes CenturyPly saying buyers often mixed up the IS 710 and 710 BWP marks.

Which to use where

PlaceUseWhy
Kitchen sink baseBWPPipes leak; water sits
Kitchen hob and other base unitsBWP, or BWR to saveSpills and mopping at floor level
Kitchen wall cabinetsBWR (or HDHMR)Steam, little standing water
Bathroom vanityBWP onlyGreenply reports ordinary grades failing in 18–24 months
Utility and laundryBWPWashing machine and wet floor
Wardrobe on a bathroom or outside wallBWPDamp comes through the wall
Wardrobe on a dry inside wallBWRBWP is over-specified here
TV unit, bookshelves, bedBWRDry rooms; strength matters more than water

When BWR is the right choice

Most of a home is dry, and BWR is plenty for it. Bedroom wardrobes, the TV unit, the bed and kitchen wall cabinets don't sit in water. Greenply itself says BWP in dry bedroom furniture adds cost without a gain in performance.

When BWP is the right choice

Anywhere water stays: under the sink, where pipes leak, and in a bathroom vanity, which gets wet every day. Greenply puts BWR at 3–5 years in wet areas and BWP at 10–15 years or more.

If you can't afford BWP everywhere, spend it on the sink base and the vanity first. Those are the cabinets that fail first.

Cost for a typical 10×10 ft L-shaped kitchen

Two 10 ft walls give 18 running ft. At the typical rate of ₹11,000 per running ft with laminate shutters and granite, using the calculator's split of about 65% of the price in base cabinets and 35% in wall cabinets:

BoxesWorkingTypical ₹Range
All BWR18 × ₹11,000 × 1.05₹2,07,900₹1,51,200–2,83,500
BWP base, BWR wall18 × ₹11,000 × (0.65 × 1.2 + 0.35 × 1.05)₹2,27,205₹1,65,240–3,09,825
All BWP18 × ₹11,000 × 1.2₹2,37,600₹1,72,800–3,24,000
Cabinets only, metro, before GST, accessories and appliances. Add 18% GST.

BWP base units add about ₹19,300 over all-BWR here. For a wardrobe, the calculator prices BWP boxes at about 15% over HDHMR: a 6×7 ft laminate wardrobe goes from about ₹56,700 to ₹65,205. It does not price BWR wardrobes separately; by CenturyPly's sheet prices, BWR sits between HDHMR and BWP.

How to check what you're getting

  • Read the stamp on each sheet before it is cut: IS 303 with BWR or BWP, or IS 710, with the ISI mark and the brand.
  • Don't take a printed "BWP" on trust. Greenply says unbranded plywood claiming BWP without IS 710 certification is just a label.
  • Know that "710" in a product name is not the same as IS 710 certification; Ply Reporter reports buyers mixing up IS 710 and 710 BWP marks.
  • Press the edges for gaps between the plies and check the thickness is even across the sheet.
  • Ask the carpenter or kitchen company to write the grade for each cabinet in the quote, sink base and vanity separately.

Common questions

What is the difference between BWR and BWP plywood?

BWR (boiling water resistant) plywood handles splashes but degrades with sustained water, while BWP (boiling water proof) plywood is bonded with phenol-formaldehyde and made to take continuous water. BWR comes under IS 303; BWP comes under IS 303 or IS 710, the marine standard.

Is BWP the same as marine plywood?

Not always. IS 710 is the marine plywood standard and its sheets are BWP grade, but BIS has also added a BWP grade to IS 303 for interior plywood. A BWP sheet can therefore be stamped IS 303 or IS 710, so read the stamp.

Which plywood is best for a bathroom vanity?

BWP plywood is the right choice for a bathroom vanity. Greenply recommends only BWP there and reports vanities made with ordinary grades failing within 18–24 months.

Is BWR plywood good enough for a kitchen?

BWR plywood is good enough for kitchen wall cabinets and base cabinets away from the sink. Use BWP plywood for the sink base, where water sits. BWR kitchen boxes cost about ₹8,400–15,750 per running ft with laminate shutters, against ₹9,600–18,000 for BWP.

How long do BWR and BWP plywood last?

In wet areas, Greenply puts BWR plywood at about 3–5 years and BWP plywood at 10–15 years or more. Warranties vary by brand: CenturyPly gives BWP a termite warranty of 8 years to lifetime, and Greenply gives its Marine 710 a lifetime warranty.

How much does BWP plywood cost compared with BWR?

CenturyPly lists an 18 mm sheet at ₹2,200–3,600 for BWR and ₹2,800–6,000 for BWP. Greenply gives BWR at ₹55–85 per sq ft and BWP at ₹80–130, though another of its pages puts BWP at ₹115–180. On a 10×10 ft L-shaped kitchen, all-BWP boxes cost about ₹29,700 more than all-BWR.

Find the people

Related guides

Sources

Most published cost figures come from firms that sell the work. We give ranges and you should get 2–3 quotes.

  1. BIS: IS 303:1989 Plywood for general purposes, with amendments (Public.Resource.Org)
  2. Ply Reporter: BWP grade comes under IS 303, June 2024
  3. Greenply: BWP vs BWR plywood for your home, June 2026
  4. Greenply: MR grade vs BWP plywood, July 2026
  5. Greenply: is BWP 710 plywood suitable for wet areas?, April 2026
  6. CenturyPly: BWP, BWR and MR grade plywood compared
  7. CenturyPly: HDHMR vs plywood
  8. Comaron: modular kitchen prices by layout, 2026

Your cart

Pick for your space

We’ll fit Room of the day, your cart’s alternatives and your budget to it.

Project type

Location

When are you starting?
What help do you need?Pick any

Saved in this browser. Join free to keep it on every device.

BWR vs BWP plywood for kitchen, bathroom and wardrobe (2026)