Ceramic vs vitrified tiles for a bathroom (2026)
Design IRL Editorial · Figures checked 11 November 2026 · For owners choosing tiles for a new or redone bathroom · How we make our guides
For a bathroom in India, use ceramic tiles on the walls and anti-skid vitrified tiles on the floor. Ceramic costs less, about ₹65–110 per sq ft laid, and is fine on a wall. Vitrified absorbs far less water and is much stronger, which matters underfoot; look for an R10 or R11 slip rating.
The short answer
Verdict
Ceramic tiles: best for bathroom walls, and for the floor of a lightly used bathroom on a tight budget if they are anti-skid. Vitrified tiles: best for bathroom floors and showers, in a matt anti-skid finish, and for walls if you want large tiles or the same tile throughout.
How they compare
| Ceramic tiles | Vitrified tiles | |
|---|---|---|
| Cost, laid | ₹65–110 per sq ft | ₹100–200 per sq ft (2×2 ft) |
| Water absorption | Glazed wall tiles sit in IS 15622 group BIII: over 10% | Group BIa, the lowest: 0.08% or less in the 2006 edition; 0.5% or less in trade guides |
| Strength | Breaking strength at least 200 N under 7.5 mm thick, 500 N at 7.5 mm and over | At least 800 N under 7.5 mm thick, 1,500 N at 7.5 mm and over |
| Lifespan | Not given in years; may need regrouting where it stays damp | Not given in years; keeps its finish for years with little upkeep |
| Finish options | Glazed: glossy, matt or semi-matt | Glazed or unglazed, polished to unpolished; anti-skid; large sizes cut grout lines |
| Slip | Depends on finish; ask for the R rating | Polished ones are slippery when wet; choose anti-skid |
| Maintenance | Occasional regrouting in damp areas | Very little |
| Installation | Easy to install | Denser and harder |
| Wastage | 8%; buy 10% extra in a bathroom | 8%; buy 10% extra in a bathroom |
| Best for | Bathroom walls | Bathroom floors and showers |
Sources disagree on ceramic floors. Houseyog and Housegyan list ceramic as a bathroom choice because it is cheap and easy to wash. Somany, a tile maker, recommends vitrified for bathrooms and ceramic only where moisture isn't constant. We side with Somany for the floor and the shower.
Which to use where
| Part of the bathroom | Use | Why |
|---|---|---|
| Shower floor | Anti-skid vitrified, R11 | Wettest spot; Hansgrohe suggests R11 for floor-level showers |
| Rest of the floor | Anti-skid vitrified, R10 or more | R10 is usually enough in a home bathroom |
| Shower walls, full height | Ceramic or vitrified | Both work on walls; ceramic costs less |
| Dry walls to 7 ft | Ceramic | Cheapest; or paint above with a washable finish |
| Vanity backsplash | Ceramic or vitrified | Splashes only |
| Wet balcony or utility | Anti-skid vitrified, R11 | Rain and outdoor use |
When ceramic tiles are the right choice
On the walls. Ceramic is cheaper and easy to install, and nobody stands on a wall. The standard itself keeps a group for it: BIS puts glazed ceramic wall tiles in group BIII, the high-absorption one.
On a floor, only in a lightly used bathroom and only in an anti-skid finish. Expect to regrout damp corners every few years.
When vitrified tiles are the right choice
On the floor, every time the budget allows. Vitrified tile is denser, absorbs almost no water and has about four times the breaking strength the standard asks of a thin wall tile. In a 40 sq ft bathroom the extra cost over ceramic is a few thousand rupees.
Pick matt or anti-skid, not polished. A glossy vitrified tile looks good in the showroom and is slippery under a wet foot.
Cost for a typical 5×8 ft bathroom
Take a 40 sq ft bathroom with walls tiled to 7 ft. The walls come to about 182 sq ft less a 2.5×7 ft door, so about 165 sq ft. Add 10% to both floor and walls for cuts and spares.
| Option | Working | Approx. ₹ |
|---|---|---|
| A. Ceramic throughout | (44 + 182) sq ft × ₹65–110 | ₹14,690–24,860 |
| B. Ceramic walls, vitrified floor | 182 × ₹65–110 + 44 × ₹100–200 | ₹16,230–28,820 |
| C. Vitrified throughout | 226 sq ft × ₹100–200 | ₹22,600–45,200 |
Option B costs only about ₹1,500–4,000 more than ceramic throughout and puts the stronger tile where you stand. That is the split we would choose.
How to check what you're getting
- Look for the ISI mark and IS 15622 on the carton. BIS certifies pressed ceramic tiles, including vitrified ones, under this standard, and tests their coefficient of friction.
- Ask for the water absorption group: BIa for fully vitrified, BIII for glazed wall tiles.
- For floors, ask for the R rating (DIN 51130) in the catalogue. Hansgrohe puts R10 at medium slip resistance and R11 for floor-level showers. Treat a tile with no rating as not anti-skid.
- Buy the full quantity, with 10% extra, from one batch so the shade matches.
- Have the floor waterproofed and ponding-tested before tiling, and sloped to the drain.
- Tap the tiles after laying. A hollow sound means gaps behind them.
Common questions
Are ceramic or vitrified tiles better for a bathroom?
Use ceramic tiles on bathroom walls and anti-skid vitrified tiles on the floor. Ceramic costs about ₹65–110 per sq ft laid and is fine on walls. Vitrified, at ₹100–200, absorbs far less water and is much stronger, which matters underfoot.
Can ceramic tiles be used on a bathroom floor?
Yes, in a lightly used bathroom and in an anti-skid finish, but sources differ. Houseyog and Housegyan list ceramic for bathrooms; Somany, a tile maker, recommends vitrified for bathrooms and ceramic only where moisture isn't constant. Ceramic may need regrouting in damp areas.
What anti-skid rating do bathroom floor tiles need?
Hansgrohe says an R10 slip rating is usually enough for a home bathroom floor and suggests R11 for floor-level showers. The R rating comes from the DIN 51130 test and should be in the tile catalogue; treat a tile with no rating as not anti-skid.
What is the difference in water absorption between ceramic and vitrified tiles?
Under IS 15622, the BIS standard for pressed ceramic tiles, glazed ceramic wall tiles fall in group BIII, over 10% water absorption. Vitrified tiles are group BIa, the lowest: 0.08% or less in the 2006 edition, and 0.5% or less in trade guides.
How much do tiles cost for a 5×8 ft bathroom?
For a 40 sq ft bathroom with walls tiled to 7 ft, about 226 sq ft with 10% extra: about ₹14,690–24,860 in ceramic throughout, ₹16,230–28,820 with ceramic walls and a vitrified floor, and ₹22,600–45,200 in vitrified throughout, supplied and laid in a metro before GST.
Are polished vitrified tiles safe in a bathroom?
No. Polished vitrified tiles are slippery when wet, so choose a matt or anti-skid finish for a bathroom floor, rated R10 or more, or R11 in a floor-level shower.
Find the people
Related guides
- Bathroom renovation cost in India, item by item (2026)What redoing a 40 sq ft bathroom costs at each level, item by item, how long it takes and the order the work goes in.
- Waterproofing cost in India: terrace, bathrooms and walls (2026)Where a home needs waterproofing, what each method costs per sq ft and how long it lasts, and how to find the cause of damp first.
- Flooring cost in India: vitrified, marble, granite, wood (2026)What each flooring costs per sq ft laid, how much extra to buy, and which rooms suit which material.
- Vitrified tiles vs marble for a living room (2026)Vitrified tiles, Indian marble and Italian marble for a living room floor: cost per sq ft laid, stains, polishing, wastage and a worked 300 sq ft example.
- Laminate vs vinyl vs engineered wood for a bedroom (2026)Laminate, vinyl/SPC and engineered wood for a bedroom floor: cost per sq ft laid, water, wear, lifespan and a worked 12×12 ft example.
Sources
Most published cost figures come from firms that sell the work. We give ranges and you should get 2–3 quotes.
- BIS: product manual for pressed ceramic tiles, IS 15622:2017
- IS 15622:2006, pressed ceramic tiles (Public.Resource.Org)
- Somany: ceramic or vitrified tiles
- Hansgrohe: slip-resistant tiles for the bathroom
- Houseyog: flooring cost in India per sq ft
- Housegyan: flooring options for Indian homes in 2026
- Houseyog: bathroom renovation cost in India, April 2026